iodine/CHANGELOG

iodine - https://code.kryo.se/iodine

***********************************

CHANGES:

master:
	- Mac OS X: Support native utun VPN devices. Patch by
		Peter Sagerson, ported from OpenVPN by Catalin Patulea.
	- Fix compilation failure on kFreeBSD and Hurd, by Gregor Herrmann
	- Patch from Ryan Welton that fixes compilation warning.
	- README converted to markdown by Nicolas Braud-Santoni.
	- Linux: use pkg-config for systemd support flags.
		Patch by Jason A. Donenfeld.
	- Add support for IPv6 in the server.
	   Raw mode will be with same protocol as used for login.
	   Traffic inside tunnel is still IPv4.
	- Update android build to support 5.0 (Lollipop) and newer.
	- Change external IP lookup to using myip.opendns.com via DNS.

2014-06-16: 0.7.0 "Kryoptonite"
	- Partial IPv6 support (#107)
	   Client can connect to iodined through an relaying IPv6
	   nameserver. Server only supports IPv4 for now.
	   Traffic inside tunnel is IPv4.
	- Add socket activation for systemd, by Michael Scherer.
	- Add automated lookup of external ip (via -n auto).
	- Bugfix for OS X (Can't assign requested address)
	- Fix DNS tunneling bug caused by uninitialized variable, #94
	- Handle spaces when entering password interactively, fixes #93.
		Patch by Hagar.
	- Add -R option to set OpenBSD routing domain for the DNS socket.
		Patch by laurent at gouloum fr, fixes #95.
	- Add android patches and makefile, from Marcel Bokhorst, fixes #105.
	- Added missing break in iodine.c, by Pavel Pergamenshchik, #108.
	- A number of minor patches from Frank Denis, Gregor Herrmann and
		Barak A. Pearlmutter.
	- Testcase compilation fixes for OS X and FreeBSD
	- Do not let sockets be inherited by sub-processes, fixes #99.
	- Add unspecified RR type (called PRIVATE; id 65399, in private use
		range). For servers with RFC3597 support. Fixes #97.
	- Fix authentication bypass vulnerability; found by Oscar Reparaz.

2010-02-06: 0.6.0-rc1 "Hotspotify"
	- Fixed tunnel not working on Windows.
	- Any device name is now supported on Windows, fixes #47.
	- Multiple installed TAP32 interfaces are now supported, fixes #46.
	- Return nonzero if tunnel fails to open, fixes #62.
	- Support for setting a SELinux context, based on patch by
		Sebastien Raveau. Sample context file in doc/iodine.te
	- Allow listen port and DNS forward port to be the same if listen IP
		does not include localhost.
	- The client will now exit if configuring IP or MTU fails.
	- The starting cache miss value is randomized at startup, fixes #65.
	- Raw UDP mode added. If the iodined server is reachable directly,
		packets can be sent to it without DNS encoding. Fixes #36.
	- Do not overwrite users CC/CFLAGS/LDFLAGS, only add to them.
	- Added -F option to write pidfile, based on patch from
		misc at mandriva.org. Fixes #70.
	- Allow password to be set via environment variable, fixes #77.
		Based on patch by logix.
	- Client now prints server tunnel IP, fixes #78. Patch by logix.
	- Fix build error on Mac OS X 10.6, patch by G. Rischard. #79.
	- Added support for CNAME/TXT/A/MX query types, fixes #75.
		Patch by Anne Bezemer, merge help by logix.
	- Merged low-latency patch from Anne Bezemer, fixes #76.
	- Resolve client nameserver argument if given as hostname, fixes #82.
	- Open log before chroot, fixes #86: logging on FreeBSD.
	- Merged big bugfix patch from Anne Bezemer, #88.

2009-06-01: 0.5.2 "WifiFree"
	- Fixed client segfault on OS X, #57
	- Added check that nameserver lookup was successful
	- Fixed ENOTSOCK error on OS X and FreeBSD, #58.

2009-03-21: 0.5.1 "Boringo"
	- Added initial Windows support, fixes #43.
	- Added length check of autoprobe responses
	- Refactored and added unit tests
	- Added syslog logging for iodined on version and login packets
	- Fixed segfault when encoding just one block, fixes #51.
		The normal code was never affected by this.
	- Added win32 code to read DNS server from system, fixes #45.
	- Disabled password echo on win32, fixes #44.
	- Fix encoding error making all autoprobing > 1024 bytes fail, #52.
	- Increase default interface MTU to 1200.
	- Fix autoprobing error making every third probe fail, set IP flag
		Dont-Fragment where supported. Fixes #54.
	- Added TAP32 version 0901 as accepted (#53).

2009-01-23: 0.5.0 "iPassed"
	- Fixed segfault in server when sending version reject.
	- Applied patch to make iodine build on BeOS R5-BONE and Haiku,
		from Francois Revol. Still work to do to get tun device working.
	- Added capability to forward DNS queries outside tunnel domain to
		a nameserver on localhost. Use -b port to enable, fixes #31.
	- iodined now replies to NS request on its own domain, fixes issue #33.
		The destination IP address is sent as reply. Use -n to specify
		a specific IP address to return (if behind NAT etc).
	- Upstream data is now Base64 encoded if relay server preserves case and
		supports the plus (+) character in domain names, fixes #16.
	- Fixed problem in client when DNS trans. ID has highest bit set (#37)
	- IP addresses are now assigned within the netmask, so iodined can
		use any address for itself, fixes #28.
	- Netmask size is now adjustable. Setting a small net will reduce the
		number of users. Use x.x.x.x/n notation on iodined tunnel ip.
		This fixes #27.
	- Downstream data is now fragmented, and the fragment size is auto-
		probed after login. Fixes #7. It only took a few years :)
	- Enhanced the checks that validates incoming packets
	- Fixed endless loop in fragment size autodetection, #39.
	- Fixed broken hostname dot placing with specific lengths, #40.

2008-08-06: 0.4.2 "Opened Zone"
	- Applied a few small patches from Maxim Bourmistrov and Gregor Herrmann
	- Applied a patch for not creating and configuring the tun interface,
		Debian bug #477692 by Vincent Bernat, controlled by -s switch
	- Applied a security patch from Andrew Griffiths, use setgroups() to
		limit the groups of the user
	- Applied a patch to make iodine build on (Open)Solaris, from Albert Lee
		Needs TUN/TAP driver http://www.whiteboard.ne.jp/~admin2/tuntap/
		Still needs more code in tun.c for opening/closing the device
	- Added option in server (-c) to disable IP/port checking on packets,
		will hopefully help when server is behind NAT
	- Fixed bug #21, now only IP address part of each packet is checked.
		Should remove the need for the -c option and also work with
		bugfixed DNS servers worldwide.
	- Added -D option on server to enable debugging. Debug level 1 now 
		prints info about each RX/TX datagram.

2007-11-30: 0.4.1 "Tea Online"
	- Introduced encoding API
	- Switched to new Base32 implementation
	- Added Base64 implementation that only uses 63 chars (not used yet)
	- Refined 'install' make target and use $(MAKE) for recursive calls
	- All received error messages (RCODE field) are echoed
	- Top domain limited to 128 chars
	- Case preservation check sent after login to decide codec
	- Fixed crash on incoming NULL query in server with bad top domain
	- /etc/resolv.conf is consulted if no nameserver is given on commandline
	- Applied patch from Matthew W. S. Bell (Detach before chroot/dropping priv)

2007-03-25: 0.4.0 "Run Home"
	- Added multiuser support (up to 8 users simultaneously)
	- Added authentication (password entered as argument or on stdin)
	- Added manpage
	- Added install/uninstall make target
	- Cleanup of dns code, more test cases, use check library
	- Changed directory structure

2006-11-08: 0.3.4
	- Fixed handshake() buffer overflow
	  (Found by poplix, Secunia: SA22674 / FrSIRT/ADV-2006-4333)
	- Added more tests
	- More name parsing enhancements
	- Now runs on Linux/AMD64
	- Added setting to change server port

2006-11-05: 0.3.3
	- Fixed possible buffer overflow
	  (Found by poplix, Bugtraq ID: 20883)
	- Reworked dns hostname encoding

2006-09-11: 0.3.2
	- Support for NetBSD
	- Fixed potential security problems
	- Name parsing routines rewritten, added regression tests
	- New encoding, 25% more peak upstream throughput
	- New -l option to set local ip to listen to on server

2006-07-11: 0.3.1 
	- Add Mac OSX support
	- Add setting device name
	- Use compression of domain name in reply (should allow setting MTU 
		approx 200 bytes higher)

2006-06-24: 0.3.0
	- First public release
	- Support for Linux, FreeBSD, OpenBSD