homeassistant/docker-compose.yml

@@ -0,0 +1,11 @@
+version: '3'
+services:
+  homeassistant:
+    container_name: homeassistant
+    image: "ghcr.io/home-assistant/home-assistant:stable"
+    volumes:
+      - ${HOMEASSISTANT_PATH}/config:/config
+      - /etc/localtime:/etc/localtime:ro
+    restart: unless-stopped
+    privileged: true
+    network_mode: host

homepage/.env

@@ -0,0 +1 @@
+HOMEPAGE_CONFIG_PATH=/mnt/data/storage/homepage/config

homepage/config

@@ -0,0 +1 @@
+/mnt/data/storage/homepage/config/

homepage/docker-compose.yml

@@ -0,0 +1,13 @@
+version: "3.3"
+
+services:
+  homepage:
+    image: ghcr.io/benphelps/homepage:latest
+    container_name: homepage
+    network_mode: bridge
+    restart: unless-stopped
+    ports:
+      - 80:3000
+    volumes:
+      - ${HOMEPAGE_CONFIG_PATH}:/app/config # Make sure your local config directory exists
+      - /var/run/docker.sock:/var/run/docker.sock # (optional) For docker integrations

jellyfin/docker-compose.yml

@@ -0,0 +1,26 @@
+version: '3.5'
+
+services:
+  jellyfin:
+    image: jellyfin/jellyfin
+    container_name: jellyfin
+    #user: 1000:1000
+    network_mode: 'host'
+    volumes:
+      - /mnt/data/storage/jellyfin/config:/config
+      - /mnt/data/storage/jellyfin/cache:/cache
+      - /mnt/hdd/Media:/media
+
+    #ports:
+    #  - "8096:8096/tcp"
+    #  - "8920:8920/tcp"
+    #  - "1900:1900/udp"
+    #  - "7359:7359/udp"
+    restart: 'unless-stopped'
+    # Optional - alternative address used for autodiscovery
+    #environment:
+    #  - JELLYFIN_PublishedServerUrl=http://example.com
+    # Optional - may be necessary for docker healthcheck to pass if running in host network mode
+    extra_hosts:
+      - "host.docker.internal:host-gateway"
+

kopia/docker-compose.yml

@@ -1,59 +0,0 @@
-version: '3.7'
-
-# on naspi for remote docker stop commands:
-# sudo visudo
-# thord   ALL=(ALL) NOPASSWD: /bin/systemctl start docker, /bin/systemctl stop docker
-
-services:
-    kopia:
-        image: kopia/kopia:latest
-        hostname: kopia-host
-        container_name: kopia
-        restart: unless-stopped
-        networks:
-            vlan:
-                ipv4_address: 192.168.1.102
-        ports:
-            - 51515:51515
-        command:
-            - server
-            - start
-            - --disable-csrf-token-checks
-            - --insecure
-            - --address=0.0.0.0:51515
-            - --server-username=${KOPIA_USER_NAME}
-            - --server-password=${KOPIA_USER_PASSWORD}
-        environment:
-            # Set repository password
-            KOPIA_PASSWORD: "${KOPIA_PASSWORD}"
-            USER: "User"
-        volumes:
-            # Mount local folders needed by kopia
-            - /opt/kopia/config:/app/config
-            - /opt/kopia/cache:/app/cache
-            - /opt/kopia/logs:/app/logs
-            # Use NFS volume for storage
-            - nfs-naspi:/data/naspi:ro
-            # Mount repository location locally
-            - /opt/kopia/repository:/repository
-            # Mount path for browsing mounted snapshots
-            - /tmp:/tmp:shared
-            - /home/thord/.config/rclone:/app/rclone
-            - /usr/bin/rclone:/app/rclone-bin
-
-volumes:
-    nfs-naspi:
-        driver: local
-        driver_opts:
-            type: nfs
-            o: addr=${NFS_SERVER_IP},ro,nolock
-            device: ":/mnt/data"
-networks:
-    vlan:
-        driver: macvlan
-        driver_opts:
-          parent: eno1  # Adjust the parent interface based on your host configuration
-        ipam:
-          config:
-            - subnet: 192.168.1.0/24
-              gateway: 192.168.1.1  # Adjust the gateway based on your network configuration

librespeed/docker-compose.yml

@@ -0,0 +1,22 @@
+version: "2.1"
+services:
+  librespeed:
+    image: lscr.io/linuxserver/librespeed:latest
+    container_name: librespeed
+    environment:
+      - PUID=1000
+      - PGID=1000
+      - TZ=Etc/UTC
+      - PASSWORD=PASSWORD
+      - CUSTOM_RESULTS=false #optional
+      - DB_TYPE=mysql #optional
+      - DB_NAME=${DB_NAME} #optional
+      - DB_HOSTNAME=${DB_HOSTNAME} #optional
+      - DB_USERNAME=${DB_USERNAME} #optional
+      - DB_PASSWORD=${DB_PASSWORD} #optional
+      - DB_PORT=${DB_PORT} #optional
+    volumes:
+      - /mnt/data/storage/librespeed/config:/config
+    ports:
+      - 8084:80
+    restart: unless-stopped

mariadb/docker-compose.yml

@@ -0,0 +1,23 @@
+version: '3.1'
+
+services:
+
+  db:
+    container_name: mariadb-main
+    image: mariadb
+    restart: always
+    command: --transaction-isolation=READ-COMMITTED --binlog-format=ROW
+    volumes:
+      - /mnt/data/mysql:/var/lib/mysql
+    environment:
+      - MARIADB_ROOT_PASSWORD=${MARIADB_ROOT_PASSWORD}
+      - MARIADB_DATABASE=${MARIADB_DATABASE}
+      - MARIADB_USER=${MARIADB_USER}
+      - MARIADB_PASSWORD=${MARIADB_PASSWORD}
+
+  adminer:
+    container_name: mariadb-adminer
+    image: adminer
+    restart: always
+    ports:
+      - 8082:8080

minecraft/docker-compose.yml

@@ -3,12 +3,12 @@ version: '3.3'
 services:
     minecraft-server:
         volumes:
-            - ./server:/data
+            - serverdata:/data
-            - ./mods:/data/mods
         environment:
-            - TYPE=FABRIC
+            - TYPE=FORGE
             - MEMORY=4G
-            - VERSION=1.20.4
+            - VERSION=1.18.2
+            - FORGE_VERSION=40.1.93
             - EULA=TRUE
             - MOTD=Hej och välkommen!
         ports:
@@ -16,3 +16,10 @@ services:
         container_name: minecraft
         image: itzg/minecraft-server
 
+volumes:
+    serverdata:
+        driver_opts:
+            type: "nfs"
+            o: "addr=192.168.1.100,nfsvers=4,retrans=6"
+            device: ":/mnt/data/storage/minecraft"
+

nextcloud/docker-compose.yml

@@ -0,0 +1,31 @@
+version: '2'
+
+volumes:
+  app:
+
+services:
+  app:
+    container_name: nextcloud
+    image: nextcloud
+    restart: always
+    ports:
+      - 8080:80
+    volumes:
+      - app:/var/www/html
+      - /mnt/data/nextcloud/files:/var/www/html/data
+      - /mnt/data/nextcloud/config:/var/www/html/config
+    environment:
+      - MYSQL_PASSWORD=${MYSQL_PASSWORD}
+      - MYSQL_DATABASE=${MYSQL_DATABASE}
+      - MYSQL_USER=${MYSQL_USER}
+      - MYSQL_HOST=${MYSQL_HOST}
+    networks:
+      - mariadb_default
+      - proxy
+
+networks:
+  mariadb_default:
+    external: true
+  proxy:
+#    name: proxy
+    external: true

nginx-proxy/docker-compose.yml

@@ -0,0 +1,25 @@
+version: "3"
+
+# Remember to run: docker network create proxy
+
+networks:
+  proxy:
+    external: true
+
+services:
+  reverse-proxy:
+    container_name: nginx-proxy-manager
+    image: "jc21/nginx-proxy-manager:latest"
+    restart: always
+    ports:
+      - "80:80"
+      - "443:443"
+      - "81:81"
+    environment:
+      DB_SQLITE_FILE: "/data/database.sqlite"
+      DISABLE_IPV6: "true"
+    volumes:
+      - ./data:/data
+      - ./letsencrypt:/etc/letsencrypt
+    networks:
+      - proxy

nginx/docker-compose.yml

@@ -1,21 +0,0 @@
-version: '3.9'
-
-services:
-  web:
-    container_name: nginx-server
-    image: nginx:latest
-    ports:
-      - '80:80'
-      - '443:443'
-    volumes:
-      - ./src:/var/www/html
-      - ./src/minecraft/mods:/home/thord/minecraft/mods
-      - ./default.conf:/etc/nginx/conf.d/default.conf
-    links:
-      - php-fpm
-
-  php-fpm:
-    container_name: nginx-php-fpm
-    image: php:8-fpm
-    volumes:
-      - ./src:/var/www/html

opentts-server/docker-compose.yml

@@ -0,0 +1,8 @@
+version: '3.3'
+services:
+    opentts:
+        container_name: opentts
+        ports:
+            - '5500:5500'
+        image: 'synesthesiam/opentts:all'
+        command: --no-espeak --cache

owncast/docker-compose.yml

@@ -0,0 +1,12 @@
+version: '3.3'
+
+services:
+    run:
+        volumes:
+            - /mnt/data/storage/owncast:/app/data
+        ports:
+            - '8085:8080'
+            - '1935:1935'
+        image: gabekangas/owncast:latest
+        restart: always
+        container_name: owncast

paperless-ngx/docker-compose.yml

@@ -1,59 +0,0 @@
-# docker-compose file for running paperless from the Docker Hub.
-# This file contains everything paperless needs to run.
-# Paperless supports amd64, arm and arm64 hardware.
-#
-# All compose files of paperless configure paperless in the following way:
-#
-# - Paperless is (re)started on system boot, if it was running before shutdown.
-# - Docker volumes for storing data are managed by Docker.
-# - Folders for importing and exporting files are created in the same directory
-#   as this file and mounted to the correct folders inside the container.
-# - Paperless listens on port 8000.
-#
-# SQLite is used as the database. The SQLite file is stored in the data volume.
-#
-# To install and update paperless with this file, do the following:
-#
-# - Copy this file as 'docker-compose.yml' and the files 'docker-compose.env'
-#   and '.env' into a folder.
-# - Run 'docker-compose pull'.
-# - Run 'docker-compose run --rm webserver createsuperuser' to create a user.
-# - Run 'docker-compose up -d'.
-#
-# For more extensive installation and update instructions, refer to the
-# documentation.
-
-version: "3.4"
-services:
-  broker:
-    image: docker.io/library/redis:7
-    restart: unless-stopped
-    volumes:
-      - redisdata:/data
-
-  webserver:
-    image: ghcr.io/paperless-ngx/paperless-ngx:latest
-    restart: unless-stopped
-    depends_on:
-      - broker
-    ports:
-      - "8000:8000"
-    healthcheck:
-      test: ["CMD", "curl", "-fs", "-S", "--max-time", "2", "http://localhost:8000"]
-      interval: 30s
-      timeout: 10s
-      retries: 5
-    volumes:
-      - data:/usr/src/paperless/data
-      - media:/usr/src/paperless/media
-      - ./export:/usr/src/paperless/export
-      - ./consume:/usr/src/paperless/consume
-    env_file: docker-compose.env
-    environment:
-      PAPERLESS_REDIS: redis://broker:6379
-
-
-volumes:
-  data:
-  media:
-  redisdata:

photoprism/docker-compose.yml

@@ -0,0 +1,130 @@
+version: '3.5'
+
+# Example Docker Compose config file for PhotoPrism (Linux / AMD64)
+#
+# Note:
+# - Hardware transcoding is only available for sponsors due to the high maintenance and support effort.
+# - Running PhotoPrism on a server with less than 4 GB of swap space or setting a memory/swap limit can cause unexpected
+#   restarts ("crashes"), for example, when the indexer temporarily needs more memory to process large files.
+# - If you install PhotoPrism on a public server outside your home network, please always run it behind a secure
+#   HTTPS reverse proxy such as Traefik or Caddy. Your files and passwords will otherwise be transmitted
+#   in clear text and can be intercepted by anyone, including your provider, hackers, and governments:
+#   https://docs.photoprism.app/getting-started/proxies/traefik/
+#
+# Setup Guides:
+# - https://docs.photoprism.app/getting-started/docker-compose/
+# - https://docs.photoprism.app/getting-started/raspberry-pi/
+#
+# Troubleshooting Checklists:
+# - https://docs.photoprism.app/getting-started/troubleshooting/
+# - https://docs.photoprism.app/getting-started/troubleshooting/docker/
+# - https://docs.photoprism.app/getting-started/troubleshooting/mariadb/
+#
+# CLI Commands:
+# - https://docs.photoprism.app/getting-started/docker-compose/#command-line-interface
+#
+# All commands may have to be prefixed with "sudo" when not running as root.
+# This will point the home directory shortcut ~ to /root in volume mounts.
+
+services:
+  photoprism:
+    container_name: photoprism
+    image: photoprism/photoprism:latest  # :preview to test preview builds
+    ## Don't enable automatic restarts until PhotoPrism has been properly configured and tested!
+    ## If the service gets stuck in a restart loop, this points to a memory, filesystem, network, or database issue:
+    ## https://docs.photoprism.app/getting-started/troubleshooting/#fatal-server-errors
+    restart: unless-stopped
+    security_opt:
+      - seccomp:unconfined
+      - apparmor:unconfined
+    ports:
+      - "2342:2342" # HTTP port (host:container)
+    environment:
+      PHOTOPRISM_ADMIN_USER: "admin"                 # superadmin username
+      PHOTOPRISM_ADMIN_PASSWORD: "insecure"          # initial superadmin password (minimum 8 characters)
+      PHOTOPRISM_AUTH_MODE: "password"               # authentication mode (public, password)
+      PHOTOPRISM_SITE_URL: "${SITE_URL}"             # server URL in the format "http(s)://domain.name(:port)/(path)"
+      PHOTOPRISM_ORIGINALS_LIMIT: 5000               # file size limit for originals in MB (increase for high-res video)
+      PHOTOPRISM_HTTP_COMPRESSION: "gzip"            # improves transfer speed and bandwidth utilization (none or gzip)
+      PHOTOPRISM_LOG_LEVEL: "info"                   # log level: trace, debug, info, warning, error, fatal, or panic
+      PHOTOPRISM_READONLY: "false"                   # do not modify originals directory (reduced functionality)
+      PHOTOPRISM_EXPERIMENTAL: "false"               # enables experimental features
+      PHOTOPRISM_DISABLE_CHOWN: "false"              # disables updating storage permissions via chmod and chown on startup
+      PHOTOPRISM_DISABLE_WEBDAV: "false"             # disables built-in WebDAV server
+      PHOTOPRISM_DISABLE_SETTINGS: "false"           # disables settings UI and API
+      PHOTOPRISM_DISABLE_TENSORFLOW: "false"         # disables all features depending on TensorFlow
+      PHOTOPRISM_DISABLE_FACES: "false"              # disables face detection and recognition (requires TensorFlow)
+      PHOTOPRISM_DISABLE_CLASSIFICATION: "false"     # disables image classification (requires TensorFlow)
+      PHOTOPRISM_DISABLE_RAW: "false"                # disables indexing and conversion of RAW files
+      PHOTOPRISM_RAW_PRESETS: "false"                # enables applying user presets when converting RAW files (reduces performance)
+      PHOTOPRISM_JPEG_QUALITY: 85                    # a higher value increases the quality and file size of JPEG images and thumbnails (25-100)
+      PHOTOPRISM_DETECT_NSFW: "true"                 # automatically flags photos as private that MAY be offensive (requires TensorFlow)
+      PHOTOPRISM_UPLOAD_NSFW: "true"                 # allows uploads that MAY be offensive (no effect without TensorFlow)
+      # PHOTOPRISM_DATABASE_DRIVER: "sqlite"         # SQLite is an embedded database that doesn't require a server
+      PHOTOPRISM_DATABASE_DRIVER: "mysql"            # use MariaDB 10.5+ or MySQL 8+ instead of SQLite for improved performance
+      PHOTOPRISM_DATABASE_SERVER: "${DATABASE_SERVER}" # MariaDB or MySQL database server (hostname:port)
+      PHOTOPRISM_DATABASE_NAME: "${DATABASE_NAME}"   # MariaDB or MySQL database schema name
+      PHOTOPRISM_DATABASE_USER: "${DATABASE_USER}"   # MariaDB or MySQL database user name
+      PHOTOPRISM_DATABASE_PASSWORD: "${DATABASE_PASSWORD}" # MariaDB or MySQL database user password
+      PHOTOPRISM_SITE_CAPTION: "AI-Powered Photos App"
+      PHOTOPRISM_SITE_DESCRIPTION: ""                # meta site description
+      PHOTOPRISM_SITE_AUTHOR: ""                     # meta site author
+      ## Run/install on first startup (options: update https gpu tensorflow davfs clitools clean):
+      # PHOTOPRISM_INIT: "https gpu tensorflow"
+      ## Hardware Video Transcoding:
+      PHOTOPRISM_FFMPEG_ENCODER: "raspberry"        # FFmpeg encoder ("software", "intel", "nvidia", "apple", "raspberry")
+      # PHOTOPRISM_FFMPEG_BITRATE: "32"              # FFmpeg encoding bitrate limit in Mbit/s (default: 50)
+      ## Run as a non-root user after initialization (supported: 0, 33, 50-99, 500-600, and 900-1200):
+      # PHOTOPRISM_UID: 1000
+      # PHOTOPRISM_GID: 1000
+      # PHOTOPRISM_UMASK: 0000
+    ## Start as non-root user before initialization (supported: 0, 33, 50-99, 500-600, and 900-1200):
+    # user: "1000:1000"
+    ## Share hardware devices with FFmpeg and TensorFlow (optional):
+    # devices:
+    #  - "/dev/dri:/dev/dri"                         # Intel QSV
+    #  - "/dev/nvidia0:/dev/nvidia0"                 # Nvidia CUDA
+    #  - "/dev/nvidiactl:/dev/nvidiactl"
+    #  - "/dev/nvidia-modeset:/dev/nvidia-modeset"
+    #  - "/dev/nvidia-nvswitchctl:/dev/nvidia-nvswitchctl"
+    #  - "/dev/nvidia-uvm:/dev/nvidia-uvm"
+    #  - "/dev/nvidia-uvm-tools:/dev/nvidia-uvm-tools"
+    #  - "/dev/video11:/dev/video11"                 # Video4Linux Video Encode Device (h264_v4l2m2m)
+    working_dir: "/photoprism" # do not change or remove
+    ## Storage Folders: "~" is a shortcut for your home directory, "." for the current directory
+    volumes:
+      # "/host/folder:/photoprism/folder"                # Example
+      # - "~/Pictures:/photoprism/originals"             # Original media files (DO NOT REMOVE)
+      # - "/example/family:/photoprism/originals/family" # *Additional* media folders can be mounted like this
+      # - "~/Import:/photoprism/import"                  # *Optional* base folder from which files can be imported to originals
+      # - "./storage:/photoprism/storage"                # *Writable* storage folder for cache, database, and sidecar files (DO NOT REMOVE)
+
+      - /mnt/hdd/Media/Photos/Originals:/photoprism/originals
+      - /mnt/hdd/Media/Photos/Import:/photoprism/import
+      - /mnt/data/storage/photoprism:/photoprism/storage
+    networks:
+      - default
+      - proxy
+
+  ## -- (database server section removed; use separate mariadb container)
+
+  ## Watchtower upgrades services automatically (optional)
+  ## see https://docs.photoprism.app/getting-started/updates/#watchtower
+  ## activate via "COMPOSE_PROFILES=update docker compose up -d"
+  #watchtower:
+  #  restart: unless-stopped
+  #  image: containrrr/watchtower
+  #  profiles: ["update"]
+  #  environment:
+  #    WATCHTOWER_CLEANUP: "true"
+  #    WATCHTOWER_POLL_INTERVAL: 7200 # checks for updates every two hours
+  #  volumes:
+  #    - "/var/run/docker.sock:/var/run/docker.sock"
+  #    - "~/.docker/config.json:/config.json" # optional, for authentication if you have a Docker Hub account
+
+networks:
+  default:
+    name: mariadb_default
+    external: true
+  proxy:
+    external: true

pihole/docker-compose.yml

@@ -0,0 +1,34 @@
+version: "3.8"
+
+# More info at https://github.com/pi-hole/docker-pi-hole/ and https://docs.pi-hole.net/
+services:
+  pihole:
+    container_name: pihole
+    image: pihole/pihole:latest
+    # For DHCP it is recommended to remove these ports and instead add: network_mode: "host"
+    network_mode: host
+    #ports:
+      #- "53:53/tcp"
+      #- "53:53/udp"
+      #- "67:67/udp" # Only required if you are using Pi-hole as your DHCP server
+      #- "8081:80/tcp"
+    environment:
+      WEB_PORT: 8081
+      TZ: 'Europe/Stockholm'
+      # WEBPASSWORD: 'set a secure password here or it will be random'
+    # Volumes store your data between container upgrades
+    volumes:
+      - '/mnt/data/storage/pihole/etc-pihole:/etc/pihole'
+      - '/mnt/data/storage/pihole/etc-dnsmasq.d:/etc/dnsmasq.d'
+    #   https://github.com/pi-hole/docker-pi-hole#note-on-capabilities
+    cap_add:
+      - NET_ADMIN # Required if you are using Pi-hole as your DHCP server, else not needed
+    restart: unless-stopped
+#    networks:
+#      - proxy
+
+#networks:
+#   default:
+#      external: true
+#   proxy:
+#      external: true

portainer/docker-compose.yml

@@ -1,14 +0,0 @@
-services:
-  portainer:
-    image: portainer/portainer-ce:latest
-    container_name: portainer
-    restart: always
-    ports:
-      - "8000:8000"
-      - "9443:9443"
-    volumes:
-      - /var/run/docker.sock:/var/run/docker.sock
-      - portainer_data:/data
-
-volumes:
-  portainer_data:

redis/docker-compose.yml

@@ -0,0 +1,5 @@
+version: '3.3'
+services:
+    redis:
+        container_name: redis
+        image: redis:latest

stash/docker-compose.yml

@@ -0,0 +1,35 @@
+# APPNICENAME=Stash
+# APPDESCRIPTION=An organizer for your ****, written in Go
+version: '3.4'
+
+services:
+  stash:
+    image: stashapp/stash:latest
+    container_name: stash
+    restart: always
+    ## the container's port must be the same with the STASH_PORT in the environment section
+    ports:
+      - "9999:9999"
+    ## If you intend to use stash's DLNA functionality uncomment the below network mode and comment out the above ports section
+    # network_mode: host
+    logging:
+      driver: "json-file"
+      options:
+        max-file: "10"
+        max-size: "2m"
+    environment:
+      - STASH_STASH=data/
+      - STASH_GENERATED=generated/
+      - STASH_METADATA=metadata/
+      - STASH_CACHE=cache/
+      ## Adjust below to change default port (9999)
+      - STASH_PORT=9999
+    volumes:
+      - /etc/localtime:/etc/localtime:ro
+      ## Adjust below paths (the left part) to your liking.
+      ## E.g. you can change ./config:/root/.stash to ./stash:/root/.stash      
+      - /mnt/data/storage/stash-meta/config:/root/.stash
+      - /mnt/data/storage/stash-meta/metadata:/metadata
+      - /mnt/data/storage/stash-meta/cache:/cache
+      - /mnt/data/storage/stash-meta/generated:/generated
+      - /mnt/data/storage/stash:/data

transmission/docker-compose.yml

@@ -0,0 +1,24 @@
+version: "2.1"
+
+services:
+  transmission:
+    image: lscr.io/linuxserver/transmission:latest
+    container_name: transmission
+    environment:
+      - PUID=1000
+      - PGID=1000
+      - TZ=Europe/Stockholm
+      - TRANSMISSION_WEB_HOME=/combustion-release/ #optional
+      - USER=${USERNAME} #optional
+      - PASS=${PASSWORD} #optional
+      - WHITELIST= #optional
+      - PEERPORT= #optional
+      - HOST_WHITELIST= #optional
+    volumes:
+      - ./data:/config
+      - /mnt/data/downloads:/downloads
+    ports:
+      - 9091:9091
+      - 51413:51413
+      - 51413:51413/udp
+    restart: unless-stopped