mirror of
https://github.com/yggdrasil-network/public-peers.git
synced 2024-11-22 20:59:20 +02:00
Christer Warén
GitHub
commit
9352b02c74
30
README.md
30
README.md
|
|
@ -1,5 +1,31 @@
|
|||
# Public Peers
|
||||
|
||||
This repository contains peering information for publicly accessible nodes on the Yggdrasil network.
|
||||
This repository contains peering information for publicly accessible nodes on
|
||||
the Yggdrasil network. If you are new to the network then this is a good place
|
||||
to start in order to get connected.
|
||||
|
||||
In most cases, public peers should be accessible by adding the string provided for each peer to the `Peers: [],` list of your config file (comma separated).
|
||||
In most cases, public peers should be accessible by adding the string provided
|
||||
for each peer to the `Peers: []` section of your `yggdrasil.conf` configuration
|
||||
file.
|
||||
|
||||
Example in `yggdrasil.conf`:
|
||||
```
|
||||
Peers:
|
||||
[
|
||||
tcp://a.b.c.d:e
|
||||
tcp://d.c.b.a:e
|
||||
tcp://[a:b:c::d]:e
|
||||
tcp://[d:c:b::a]:e
|
||||
]
|
||||
```
|
||||
|
||||
### How do I pick peers?
|
||||
|
||||
Always try to pick peers that are as close to you geographically as possible, as
|
||||
this will keep the latency of the network down.
|
||||
|
||||
If you are using a home connection then you should avoid peering with any nodes
|
||||
that are far away, as you may end up carrying traffic for the rest of the
|
||||
network.
|
||||
|
||||
For normal usage, you probably only need 2 or 3 peers.
|
||||
|
|
|
|||
|
|
@ -1,9 +1,8 @@
|
|||
# Japan Peers
|
||||
|
||||
Add the strings from the below to the `Peers: [],` list of your config file (comma separated) to connect to these nodes.
|
||||
Add connection strings from the below list to the `Peers: []` section of your
|
||||
Yggdrasil configuration file to peer with these nodes.
|
||||
|
||||
Tokyo, operated by [BAN AI Systems](https://ban.ai/)
|
||||
|
||||
`"139.162.119.37:44478"`
|
||||
|
||||
`"[2400:8902::f03c:91ff:fe1f:c32a]:44478"`
|
||||
* Tokyo, operated by [BAN AI Systems](https://ban.ai/)
|
||||
* `tcp://139.162.119.37:44478`
|
||||
* `tcp://[2400:8902::f03c:91ff:fe1f:c32a]:44478`
|
||||
|
|
|
|||
|
|
@ -1,3 +1,4 @@
|
|||
# Singapore Peers
|
||||
|
||||
Add the strings from the below to the `Peers: [],` list of your config file (comma separated) to connect to these nodes.
|
||||
Add connection strings from the below list to the `Peers: []` section of your
|
||||
Yggdrasil configuration file to peer with these nodes.
|
||||
|
|
|
|||
|
|
@ -1,15 +1,7 @@
|
|||
# Czechia Peers
|
||||
|
||||
Add the strings from the list below to the `Peers: [],` list of your config file (comma separated) to connect to these nodes.
|
||||
Add connection strings from the below list to the `Peers: []` section of your
|
||||
Yggdrasil configuration file to peer with these nodes.
|
||||
|
||||
* *PEER IS DOWN CURRENTLY* Prague, awnet.cz, operated by [carnhofdaki](https://github.com/carnhofdaki)
|
||||
* `"94.230.156.206:9000"`
|
||||
|
||||
Example:
|
||||
|
||||
```
|
||||
Peers:
|
||||
[
|
||||
tcp://94.230.156.206:9000
|
||||
]
|
||||
```
|
||||
* `tcp://94.230.156.206:9000`
|
||||
|
|
|
|||
|
|
@ -1,10 +1,11 @@
|
|||
# Finland Peers
|
||||
|
||||
Add the strings from the below to the `Peers: [],` list of your config file (comma separated) to connect to these nodes.
|
||||
Add connection strings from the below list to the `Peers: []` section of your
|
||||
Yggdrasil configuration file to peer with these nodes.
|
||||
|
||||
* Ulvila, operated by [ano](https://github.com/ano0)
|
||||
* `"tcp://185.87.111.202:8080"`
|
||||
* `tcp://185.87.111.202:8080`
|
||||
|
||||
* Tuusula, Hetzner, operated by [sin](https://2f30.org)
|
||||
* `"tcp://95.216.146.86:12080"`
|
||||
* `"tcp://[2a01:4f9:c010:afa::2f30]:12080"`
|
||||
* `tcp://95.216.146.86:12080`
|
||||
* `tcp://[2a01:4f9:c010:afa::2f30]:12080`
|
||||
|
|
|
|||
|
|
@ -1,33 +1,25 @@
|
|||
# France Peers
|
||||
|
||||
Add the strings from the below to the `Peers: [],` list of your config file (comma separated) to connect to these nodes.
|
||||
Add connection strings from the below list to the `Peers: []` section of your
|
||||
Yggdrasil configuration file to peer with these nodes.
|
||||
|
||||
Gravelines, operated by [Philly Mesh](https://phillymesh.net)
|
||||
* Gravelines, operated by [Philly Mesh](https://phillymesh.net)
|
||||
* `tcp://37.187.124.224:12345`
|
||||
* `tcp://[2001:41d0:a:f5e0::1]:12345`
|
||||
|
||||
`"37.187.124.224:12345"`
|
||||
* Paris, operated by [Arceliar](https://github.com/Arceliar)
|
||||
* `tcp://51.15.204.214:12345`
|
||||
|
||||
`"[2001:41d0:a:f5e0::1]:12345"`
|
||||
* Paris, operated by [yakamo](https://github.com/yakamok)
|
||||
* `tcp://51.15.205.147:62071`
|
||||
|
||||
Paris, operated by [Arceliar](https://github.com/Arceliar)
|
||||
* Roubaix, OVH, operated by [cwinfo](https://cwinfo.net) and [cwchristerw](https://christerwaren.fi)
|
||||
* `tcp://51.255.223.60:64982`
|
||||
* `tcp://[2001:41d0:2:c44a:51:255:223:60]:64982`
|
||||
|
||||
`"51.15.204.214:12345"`
|
||||
* Strasbourg, OVH, operated by [cwinfo](https://cwinfo.net) and [cwchristerw](https://christerwaren.fi)
|
||||
* `tcp://46.105.92.61:62506`
|
||||
* `tcp://[2001:41d0:401:3000::4227]:62506`
|
||||
|
||||
Paris, operated by [yakamo](https://github.com/yakamok)
|
||||
|
||||
`"51.15.205.147:62071"`
|
||||
|
||||
Roubaix, OVH, operated by [cwinfo](https://cwinfo.net) and [cwchristerw](https://christerwaren.fi)
|
||||
|
||||
`"51.255.223.60:64982"`
|
||||
|
||||
`"[2001:41d0:2:c44a:51:255:223:60]:64982"`
|
||||
|
||||
Strasbourg, OVH, operated by [cwinfo](https://cwinfo.net) and [cwchristerw](https://christerwaren.fi)
|
||||
|
||||
`"46.105.92.61:62506"`
|
||||
|
||||
`"[2001:41d0:401:3000::4227]:62506"`
|
||||
|
||||
Paris, operated by [frafra](https://frafra.eu)
|
||||
|
||||
`"[2001:bc8:4400:2500::22:b13]:35033"`
|
||||
* Paris, operated by [frafra](https://frafra.eu)
|
||||
* `tcp://[2001:bc8:4400:2500::22:b13]:35033`
|
||||
|
|
|
|||
|
|
@ -1,16 +1,21 @@
|
|||
# Germany Peers
|
||||
|
||||
Add the strings from the below to the `Peers: [],` list of your config file (comma separated) to connect to these nodes.
|
||||
Add connection strings from the below list to the `Peers: []` section of your
|
||||
Yggdrasil configuration file to peer with these nodes.
|
||||
|
||||
* Limburg, OVH, less then 1ms from Frankfurt, operated by [jcgruenhage](https://jcg.re/)
|
||||
* `"51.75.65.46:65352"`
|
||||
* `tcp://51.75.65.46:65352`
|
||||
|
||||
* Limburg, OVH, operated by [cwinfo](https://cwinfo.net) and [cwchristerw](https://christerwaren.fi)
|
||||
* `tcp://54.38.157.232:37145`
|
||||
* `tcp://[2001:41d0:701:1100::36e]:37145`
|
||||
|
||||
* Baden-Baden, IONOS, operated by [jcgruenhage](https://jcg.re/)
|
||||
* `"82.165.69.111:61216"`
|
||||
* `tcp://82.165.69.111:61216`
|
||||
|
||||
* Frankfurt, DigitalOcean, operated by [Mikaela](https://mikaela.info/)
|
||||
* `"tcp://46.101.250.19:48286"`
|
||||
* `"tcp://[2a03:b0c0:3:d0::31f:d001]:48286"`
|
||||
* `tcp://46.101.250.19:48286`
|
||||
* `tcp://[2a03:b0c0:3:d0::31f:d001]:48286`
|
||||
|
||||
* Falkenstein, Hetzner, FSN1-DC7, operated by [Kipari](https://christoffer.space)
|
||||
* `tcp://5.9.112.248:39444`
|
||||
|
|
|
|||
|
|
@ -1,24 +1,18 @@
|
|||
# The Netherlands Peers
|
||||
|
||||
Add the strings from the below to the `Peers: [],` list of your config file (comma separated) to connect to these nodes.
|
||||
Add connection strings from the below list to the `Peers: []` section of your
|
||||
Yggdrasil configuration file to peer with these nodes.
|
||||
|
||||
Amsterdam, operated by [TechInc](https://techinc.nl)
|
||||
* Amsterdam, operated by [TechInc](https://techinc.nl)
|
||||
* `tcp://195.169.146.32:55060`
|
||||
|
||||
`"195.169.146.32:55060"`
|
||||
* Amsterdam, operated by [Piele / CreativeServer.Net](https://github.com/petertambach)
|
||||
* `tcp://85.17.15.221:35239`
|
||||
* `tcp://[2001:1af8:4700:a119:7::1]:35239`
|
||||
|
||||
Amsterdam, operated by [Piele / CreativeServer.Net](https://github.com/petertambach)
|
||||
|
||||
`"85.17.15.221:35239"`
|
||||
|
||||
`"[2001:1af8:4700:a119:7::1]:35239"`
|
||||
|
||||
Amsterdam, operated by [Philly Mesh](https://phillymesh.net)
|
||||
|
||||
`"146.185.176.36:12345"`
|
||||
|
||||
`"[2a03:b0c0:0:1010::1a7:c001]:12345"`
|
||||
|
||||
Amsterdam, operated by [Rostyslav Sotnychenko](https://github.com/rsotnychenko)
|
||||
|
||||
`tcp://ams1.y.sota.sh:8080` (both IPv4 and IPv6 are supported)
|
||||
* Amsterdam, operated by [Philly Mesh](https://phillymesh.net)
|
||||
* `tcp://146.185.176.36:12345`
|
||||
* `tcp://[2a03:b0c0:0:1010::1a7:c001]:12345`
|
||||
|
||||
* Amsterdam, operated by [Rostyslav Sotnychenko](https://github.com/rsotnychenko)
|
||||
* `tcp://ams1.y.sota.sh:8080` (both IPv4 and IPv6 are supported)
|
||||
|
|
|
|||
|
|
@ -0,0 +1,8 @@
|
|||
# Poland Peers
|
||||
|
||||
Add connection strings from the below list to the `Peers: []` section of your
|
||||
Yggdrasil configuration file to peer with these nodes.
|
||||
|
||||
* Warsaw, OVH, operated by [cwinfo](https://cwinfo.net) and [cwchristerw](https://christerwaren.fi)
|
||||
* `tcp://54.37.137.221:37145`
|
||||
* `tcp://[2001:41d0:601:1100::cf2]:37145`
|
||||
|
|
@ -1,15 +1,7 @@
|
|||
# Romania Peers
|
||||
|
||||
Add the strings from the list below to the `Peers: [],` list of your config file (comma separated) to connect to these nodes.
|
||||
Add connection strings from the below list to the `Peers: []` section of your
|
||||
Yggdrasil configuration file to peer with these nodes.
|
||||
|
||||
* Server Room, operated by [evgiv](https://github.com/evgivz)
|
||||
* `"185.105.4.249:37414"`
|
||||
|
||||
Example:
|
||||
|
||||
```
|
||||
Peers:
|
||||
[
|
||||
tcp://185.105.4.249:37414
|
||||
]
|
||||
```
|
||||
* `tcp://185.105.4.249:37414`
|
||||
|
|
|
|||
|
|
@ -1,12 +1,10 @@
|
|||
# Russian Peers
|
||||
|
||||
Add the strings from the below to the `Peers: [],` list of your config file (comma separated) to connect to these nodes.
|
||||
# Russia Peers
|
||||
|
||||
Add connection strings from the below list to the `Peers: []` section of your
|
||||
Yggdrasil configuration file to peer with these nodes.
|
||||
|
||||
* [Network neighborhood](http://netwhood.online) public node, Moscow Oblast, Podolsk, ALDIS Telecom Ltd, operated by [abslimit](http://netwhood.online/feedback/)
|
||||
|
||||
* `tcp://46.151.26.194:60575` (IPv4 only)
|
||||
* `tcp://46.151.26.194:60575`
|
||||
|
||||
* Saratov, DOM.RU, operated by [void.net.in](https://void.net.in)
|
||||
* `tcp://void.net.in:1666` (IPv4 only)
|
||||
|
||||
* `tcp://void.net.in:1666`
|
||||
|
|
|
|||
|
|
@ -1,8 +1,10 @@
|
|||
# Sweden Peers
|
||||
|
||||
Add the strings from the below to the `Peers: [],` list of your config file (comma separated) to connect to these nodes.
|
||||
Add connection strings from the below list to the `Peers: []` section of your
|
||||
Yggdrasil configuration file to peer with these nodes.
|
||||
|
||||
* Luleå, Norrbotten, operated by [William](https://willeponken.me/)
|
||||
* `"tcp://bohr.willeponken.me:42015"`
|
||||
* `tcp://bohr.willeponken.me:42015`
|
||||
|
||||
* Stockholm, presummably, operated by [kaos](https://cryptoanarchy.org/)
|
||||
* `"tcp://yggdrasil.cryptoanarchy.org:1478"`
|
||||
* `tcp://yggdrasil.cryptoanarchy.org:1478`
|
||||
|
|
|
|||
|
|
@ -1,9 +1,7 @@
|
|||
# Ukrainian Peers
|
||||
# Ukraine Peers
|
||||
|
||||
Add the strings from the below to the `Peers: [],` list of your config file (comma separated) to connect to these nodes.
|
||||
|
||||
|
||||
Kiev, operated by [Rostyslav Sotnychenko](https://github.com/rsotnychenko)
|
||||
|
||||
`tcp://ukr1.y.sota.sh:8080` (IPv4 only)
|
||||
Add connection strings from the below list to the `Peers: []` section of your
|
||||
Yggdrasil configuration file to peer with these nodes.
|
||||
|
||||
* Kiev, operated by [Rostyslav Sotnychenko](https://github.com/rsotnychenko)
|
||||
* `tcp://ukr1.y.sota.sh:8080` (IPv4 only)
|
||||
|
|
|
|||
|
|
@ -1,10 +1,10 @@
|
|||
# UK Peers
|
||||
# United Kingdom Peers
|
||||
|
||||
Add the strings from the below to the `Peers: [],` list of your config file (comma separated) to connect to these nodes.
|
||||
Add connection strings from the below list to the `Peers: []` section of your
|
||||
Yggdrasil configuration file to peer with these nodes.
|
||||
|
||||
London, operated by [neilalexander](https://github.com/neilalexander)
|
||||
### England
|
||||
|
||||
```
|
||||
tcp://185.164.138.18:1001
|
||||
tcp://[2a06:8ec0:0:3027::1]:1001
|
||||
```
|
||||
* London, operated by [neilalexander](https://github.com/neilalexander)
|
||||
* `tcp://185.164.138.18:1001`
|
||||
* `tcp://[2a06:8ec0:0:3027::1]:1001`
|
||||
|
|
|
|||
|
|
@ -1,11 +1,10 @@
|
|||
# Canada Peers
|
||||
|
||||
Add the strings from the below to the `Peers: [],` list of your config file (comma separated) to connect to these nodes.
|
||||
Add connection strings from the below list to the `Peers: []` section of your
|
||||
Yggdrasil configuration file to peer with these nodes.
|
||||
|
||||
## Ontario
|
||||
### Ontario
|
||||
|
||||
Toronto, operated by [deprecated.systems](https://deprecated.systems)
|
||||
|
||||
`"104.248.104.141:59168"`
|
||||
|
||||
`"[2604:a880:cad:d0::45:d001]:59168"`
|
||||
* Toronto, operated by [deprecated.systems](https://deprecated.systems)
|
||||
* `tcp://104.248.104.141:59168`
|
||||
* `tcp://[2604:a880:cad:d0::45:d001]:59168`
|
||||
|
|
|
|||
|
|
@ -1,61 +1,47 @@
|
|||
# US Peers
|
||||
# United States Peers
|
||||
|
||||
Add the strings from the below to the `Peers: [],` list of your config file (comma separated) to connect to these nodes.
|
||||
Add connection strings from the below list to the `Peers: []` section of your
|
||||
Yggdrasil configuration file to peer with these nodes.
|
||||
|
||||
## Massachusetts
|
||||
### Massachusetts
|
||||
|
||||
Boston, operated by [Stephen304](https://github.com/stephen304)
|
||||
* Boston, operated by [Stephen304](https://github.com/stephen304)
|
||||
* `tcp://50.236.201.218:56088`
|
||||
|
||||
`"50.236.201.218:56088"`
|
||||
### Nevada
|
||||
|
||||
## Nevada
|
||||
* Las Vegas, operated by [santost12](https://github.com/santost12)
|
||||
* `tcp://199.175.54.202:47313`
|
||||
* `tcp://[2607:8b00:0:96::ac18:1f8]:47313`
|
||||
|
||||
Las Vegas, operated by [santost12](https://github.com/santost12)
|
||||
### New Jersey
|
||||
|
||||
`"199.175.54.202:47313"`
|
||||
* Newark, operated by [Philly Mesh](https://phillymesh.net)
|
||||
* `tcp://45.76.166.128:12345`
|
||||
* `tcp://[2001:19f0:5:6ed:5400:ff:fe5f:94f7]:12345`
|
||||
|
||||
`"[2607:8b00:0:96::ac18:1f8]:47313"`
|
||||
* Piscataway, operated by [Asymptote Club](https://asymptote.club)
|
||||
* `tcp://45.77.107.150:34660`
|
||||
* `tcp://[2001:19f0:5:2c95:5400:1ff:fe46:9c]:34660`
|
||||
* `tcp://63.209.33.47:58149`
|
||||
* `tcp://[2001:19f0:5:2a83:5400:1ff:fe89:44db]:58149`
|
||||
|
||||
## New Jersey
|
||||
### Kansas
|
||||
|
||||
Newark, operated by [Philly Mesh](https://phillymesh.net)
|
||||
* Lenexa, operated by [jcgruenhage](https://jcg.re)
|
||||
* `tcp://108.175.10.127:61216`
|
||||
|
||||
`"45.76.166.128:12345"`
|
||||
### Texas
|
||||
|
||||
`"[2001:19f0:5:6ed:5400:ff:fe5f:94f7]:12345"`
|
||||
* Dallas, operated by [BAN AI Systems](https://ban.ai/)
|
||||
* `tcp://198.58.100.240:44478`
|
||||
* `tcp://[2600:3c00::f03c:91ff:feae:3efa]:44478`
|
||||
|
||||
Piscataway, operated by [Asymptote Club](https://asymptote.club)
|
||||
* Dallas, operated by [neutralinsomniac](https://github.com/neutralinsomniac)
|
||||
* `tcp://104.225.221.17:59323`
|
||||
|
||||
`"45.77.107.150:34660"`
|
||||
### Washington
|
||||
|
||||
`"[2001:19f0:5:2c95:5400:1ff:fe46:9c]:34660"`
|
||||
|
||||
`"63.209.33.47:58149"`
|
||||
|
||||
`"[2001:19f0:5:2a83:5400:1ff:fe89:44db]:58149"`
|
||||
|
||||
## Kansas
|
||||
|
||||
Lenexa, operated by [jcgruenhage](https://jcg.re)
|
||||
|
||||
`"108.175.10.127:61216"`
|
||||
|
||||
## Texas
|
||||
|
||||
Dallas, operated by [BAN AI Systems](https://ban.ai/)
|
||||
|
||||
`"198.58.100.240:44478"`
|
||||
|
||||
`"[2600:3c00::f03c:91ff:feae:3efa]:44478"`
|
||||
|
||||
Dallas, operated by [neutralinsomniac](https://github.com/neutralinsomniac)
|
||||
|
||||
`"104.225.221.17:59323"`
|
||||
|
||||
## Washington
|
||||
|
||||
Seattle, operated by [Philly Mesh](https://phillymesh.net)
|
||||
|
||||
`"167.88.124.177:12345"`
|
||||
|
||||
`"[2604:180:1:568::beef]:12345"`
|
||||
* Seattle, operated by [Philly Mesh](https://phillymesh.net)
|
||||
* `tcp://167.88.124.177:12345`
|
||||
* `tcp://[2604:180:1:568::beef]:12345`
|
||||
|
|
|
|||
|
|
@ -1,15 +1,12 @@
|
|||
# Australia peers
|
||||
|
||||
Add the strings from the below to the `Peers: [],` list of your config file (comma separated) to connect to these nodes.
|
||||
Add connection strings from the below list to the `Peers: []` section of your
|
||||
Yggdrasil configuration file to peer with these nodes.
|
||||
|
||||
Sydney, operated by passenger245
|
||||
* Sydney, operated by passenger245
|
||||
* `tcp://103.25.58.141:23320`
|
||||
* `tcp://[2406:d500:6:beef:21a2:a10c:6aea:0001]:23320`
|
||||
|
||||
`"tcp://103.25.58.141:23320"`
|
||||
|
||||
`"tcp://[2406:d500:6:beef:21a2:a10c:6aea:0001]:23320"`
|
||||
|
||||
Perth, operated by passenger245
|
||||
|
||||
`"tcp://45.248.78.75:17220"`
|
||||
|
||||
`"tcp://[2404:f780:8:beef:29e2:81e1:3c73:0001]:17220"`
|
||||
* Perth, operated by passenger245
|
||||
* `tcp://45.248.78.75:17220`
|
||||
* `tcp://[2404:f780:8:beef:29e2:81e1:3c73:0001]:17220`
|
||||
|
|
|
|||
11
other/i2p.md
11
other/i2p.md
|
|
@ -1,10 +1,9 @@
|
|||
# I2P hidden service peers
|
||||
|
||||
Note that the following assumes i2p is running locally and has configured SOCKS proxy on `localhost:4447`.
|
||||
Add connection strings from the below list to the `Peers: []` section of your
|
||||
Yggdrasil configuration file to peer with these nodes.
|
||||
|
||||
## Nodes
|
||||
|
||||
ST32 (TCP-only, Standard I2P service, b32 address), operated by [cathugger](http://cathugger.i2p/contact.html)
|
||||
|
||||
`"socks://localhost:4447/7mx6ztmimo5nrnmydjjtkr6maupknr3zlyr33umly22pqnivyxcq.b32.i2p:46944"`
|
||||
Note that the following assumes I2P is running locally and has configured SOCKS proxy on `localhost:4447`.
|
||||
|
||||
* ST32 (TCP-only, Standard I2P service, b32 address), operated by [cathugger](http://cathugger.i2p/contact.html)
|
||||
* `socks://localhost:4447/7mx6ztmimo5nrnmydjjtkr6maupknr3zlyr33umly22pqnivyxcq.b32.i2p:46944`
|
||||
|
|
|
|||
20
other/tor.md
20
other/tor.md
|
|
@ -1,17 +1,15 @@
|
|||
# Tor hidden service peers
|
||||
|
||||
Note that the following assumes tor is running locally and listening on the default `localhost:9050`.
|
||||
Add connection strings from the below list to the `Peers: []` section of your
|
||||
Yggdrasil configuration file to peer with these nodes.
|
||||
|
||||
## Nodes
|
||||
Note that the following assumes Tor is running locally and listening on the default `localhost:9050`.
|
||||
|
||||
HS2 (TCP-only, Hidden Service, v2), operated by [Jeff](https://i2p.rocks/contact.txt)
|
||||
* HS2 (TCP-only, Hidden Service, v2), operated by [Jeff](https://i2p.rocks/contact.txt)
|
||||
* `socks://localhost:9050/syr3orvfo5nxmao3.onion:40329`
|
||||
|
||||
`"socks://localhost:9050/syr3orvfo5nxmao3.onion:40329"`
|
||||
* HS3 (TCP-only, Hidden Service, v3), operated by [cathugger](http://cathug2kyi4ilneggumrenayhuhsvrgn6qv2y47bgeet42iivkpynqad.onion/contact.html)
|
||||
* `socks://localhost:9050/yggnekkmyitzepgl5ltdl277y5wdg36n4pc45sualo3yesm3usnuwyad.onion:1863`
|
||||
|
||||
HS3 (TCP-only, Hidden Service, v3), operated by [cathugger](http://cathug2kyi4ilneggumrenayhuhsvrgn6qv2y47bgeet42iivkpynqad.onion/contact.html)
|
||||
|
||||
`"socks://localhost:9050/yggnekkmyitzepgl5ltdl277y5wdg36n4pc45sualo3yesm3usnuwyad.onion:1863"`
|
||||
|
||||
HS3 (TCP-only, Hidden Service, v3), operated by [Mikaela](https://mikaela.info/)
|
||||
|
||||
`"socks://127.0.0.1:9050/xvkw4rj7wzy7t75kkanr54zftudlbtpjbavxcsri5irkavclynaw3xqd.onion:1234"`
|
||||
* HS3 (TCP-only, Hidden Service, v3), operated by [Mikaela](https://mikaela.info/)
|
||||
* `socks://127.0.0.1:9050/xvkw4rj7wzy7t75kkanr54zftudlbtpjbavxcsri5irkavclynaw3xqd.onion:1234`
|
||||
|
|
|
|||
|
|
@ -1,9 +1,7 @@
|
|||
# Brazil Peers
|
||||
|
||||
Add the strings from the below to the `Peers: [],` list of your config file (comma separated) to connect to these nodes.
|
||||
Add connection strings from the below list to the `Peers: []` section of your
|
||||
Yggdrasil configuration file to peer with these nodes.
|
||||
|
||||
## São Paulo
|
||||
|
||||
São Paulo, operated by [Yan Minari](https://yetanothernerd.xyz/)
|
||||
|
||||
`"45.231.133.188:58301"`
|
||||
* São Paulo, operated by [Yan Minari](https://yetanothernerd.xyz/)
|
||||
* `tcp://45.231.133.188:58301`
|
||||
|
|
|
|||
Loading…
Reference in New Issue