Update makefile and install instructions

Updated makefile now performs installation without overwriting config
and database directory.

INSTALL

@@ -1,62 +1,49 @@
 Installation
 
-Commands starting with # are to be is to run as root.
-
-1. Get the sources
+1. Get the source
 Get the source code by running
 $ git clone https://git.freesoftwareextremist.com/bloat
 You can also download the latest source tarball from the URL
 "https://git.freesoftwareextremist.com/bloat/snapshot/bloat-master.tar.gz"
 
 2. Build and install
-Install GO from your system's package manager or from https://golang.org/dl,
-then run make to compile the source.
+Install GO from your system's package manager or from https://golang.org/dl.
+Then run make to compile the source.
 $ make
 # make install
 This will perform a system wide installation of bloat. By default, it will
-install the binary in /usr/local/bin, data files in /var/bloat and config
-file in /etc. You can change these paths by editing the Makefile.
+install the binary in /usr/local/bin and data files in /usr/local/share/bloat.
+You can change these paths by editing the Makefile.
 
-3. Edit the config file
-Comments in the config file describe what each config value does. For most
-cases, you only need to change the value of "client_website".
-# $EDITOR /etc/bloat.conf
+3. Edit and copy the config file
+Edit the generated config file to you liking and then copy it to the default
+config location. Comments in the config file describe what each config value 
+does. For most cases, you only need to change the value of "client_website".
+$ $EDITOR bloat.def.conf
+# cp bloat.def.conf /etc/bloat.conf
 
-4. Create a separate user account to run bloat
-It's not required to create a separate user account, but it's a good practice
-to do so.
+4. Create database directory
+Create a directory to store session information. Optionally, create a user
+to run bloat and change the ownership of the database directory accordingly.
+# mkdir /var/bloat
 # useradd _bloat
 # chown -R _bloat:_bloat /var/bloat
-Replace /var/bloat with the value you specified in the Makefile.
+Replace /var/bloat with the value you specified in the config file.
 
 5. Run the binary
 # su _bloat -c bloat
-Now you should create an init script to automatically start the service at
-system startup.
+Now you should create an init script to automatically start bloat at system 
+startup.
 
-6. Setup TLS
-You can use an HTTP server as a reverse proxy to serve bloat over HTTPS. Here's
-a config file snippet for nginx:
-`
-server {
-	server_name bloat.example.com;
-	location / {
-		proxy_pass http://127.0.0.1:8080;
-	}
-}
-server {
-	server_name bloat.example.com;
-	listen 443 ssl;
 
-	ssl_trusted_certificate   /etc/ssl/example.com.crt;
-	ssl_certificate           /etc/ssl/example.com.fullchain.pem;
-	ssl_certificate_key       /etc/ssl/private/example.com.key;
+Update
 
-	location / {
-		proxy_pass http://127.0.0.1:8080;
-	}
-}
-`
-This configuration accepts for connections for bloat.example.com (specified by
-"client_website" in config) over both HTTP and HTTPS and forwards them to
-bloat's listen address (specified by "listen_address" in config).
+Either run git pull to fetch the updated source or download the latest tarball
+from the URL mentioned in the installation step. Then run make to install the
+updated binary and data files
+$ git pull
+$ make 
+# make install
+
+
+Note: Commands starting with # are to be is to run as root.

Makefile

@@ -1,33 +1,48 @@
 GO=go
 GOFLAGS=-mod=vendor
-BINPATH=/usr/local/bin
-DATAPATH=/var/bloat
-ETCPATH=/etc
+PREFIX=/usr/local
+BINPATH=$(PREFIX)/bin
+SHAREPATH=$(PREFIX)/share/bloat
 
-all: bloat
+TMPL=templates/*.tmpl
+SRC=main.go		\
+	config/*.go 	\
+	kv/*.go 	\
+	mastodon/*.go	\
+	model/*.go	\
+	renderer/*.go 	\
+	repo/*.go 	\
+	service/*.go 	\
+	util/*.go 	\
 
-bloat: main.go 
+all: bloat bloat.def.conf
+
+bloat: $(SRC) $(TMPL)
 	$(GO) build $(GOFLAGS) -o bloat main.go
 
+bloat.def.conf:
+	sed -e "s%=database%=/var/bloat%g" \
+		-e "s%=templates%=$(SHAREPATH)/templates%g" \
+		-e "s%=static%=$(SHAREPATH)/static%g" \
+		< bloat.conf > bloat.def.conf
+
 install: bloat
+	mkdir -p $(BINPATH) $(SHAREPATH)/templates $(SHAREPATH)/static
 	cp bloat $(BINPATH)/bloat
 	chmod 0755 $(BINPATH)/bloat
-	mkdir -p $(DATAPATH)/database
-	cp -r templates $(DATAPATH)/
-	cp -r static $(DATAPATH)/
-	sed -e "s%=database%=$(DATAPATH)/database%g" \
-		-e "s%=templates%=$(DATAPATH)/templates%g" \
-		-e "s%=static%=$(DATAPATH)/static%g" \
-		< bloat.conf > $(ETCPATH)/bloat.conf
+	cp -r templates/* $(SHAREPATH)/templates
+	chmod 0644 $(SHAREPATH)/templates/*
+	cp -r static/* $(SHAREPATH)/static
+	chmod 0644 $(SHAREPATH)/static/*
+
+tags: $(SRC)
+	gotags $(SRC) > tags
 
 uninstall:
 	rm -f $(BINPATH)/bloat
-	rm -fr $(DATAPATH)/templates
-	rm -fr $(DATAPATH)/static
-	rm -f $(ETCPATH)/bloat.conf
+	rm -fr $(SHAREPATH)/templates
+	rm -fr $(SHAREPATH)/static
 
 clean: 
 	rm -f bloat
-
-run: bloat
-	./bloat -f bloat.conf
+	rm -f bloat.def.conf

README

@@ -21,7 +21,7 @@ $ ed bloat.conf
 Run the binary
 $ ./bloat -f bloat.conf
 
-You can now access the frontend at http://localhost:8080, which is the default
+You can now access the frontend at http://127.0.0.1:8080, which is the default
 listen address. See the INSTALL file for more details.